The remote control offers the facility to select the heat output from the appliance
between
HI
,
LO
heat and FAN settings.
HI
heat is set by default. This is a global heat
setting and once set all other operational modes will operate with this setting.
In order to set/change the heat setting:
• From the home screen press and hold the
ADV
button for 2 seconds. The remote
will enter the heat selection screen.
• Use the arrow keys to navigate to the desired setting and confirm using the
ENTER
key. The
FAN
is on a separate screen that is accessed by continuously
pressing the arrow keys.
• The remote will return to the home screen and all heating modes will function
with the selected heat output.
NOTE:
If FAN output is selected, FAN will be visible on the home screen instead of time.
Heat Output Selection
NOTE:
The HI temperature setting will modulate the heat output to optimise the efficiency
of the product. As the room temperature approaches the set-point the heater will
automatically switch to the lo heat setting.
20
Summary of Contents for PFH30E
