background image

•  Use the arrow keys to select the period (1-4) you wish to set and confirm using 

the 

ENTER

 key.

•  Use the arrow keys to edit the ‘On’ time, confirm each digit using the 

ENTER

 

key. After the final digit is confirmed the remote will automatically enter the 
set-point setting screen.

•  Use the arrow keys to set the desired set-point temperature, confirm using the 

ENTER

 key.

• The ‘Off’ time should then be set using the same method as the ‘On’ period .

You will then be returned to the Period setting screen, with the next period highlighted. 
The previous Period has been successfully set and is confirmed by a beep from the 
appliance. The remainder of the periods can then be set as per the above procedure.

Alternatively the timer setting mode can be exited by pressing MENU or continuously 
pressing the BACK key 

  

NOTE:

If the MENU key or the BACK key is used exit setting mode from the time or 

temperature setting screen the changes will not be saved, it is essential that the 

final ‘Off’ time is confirmed and a beep is heard from the appliance before exiting 

this mode. 

Copy and Paste Time profiles

It is possible to copy the complete time profile from one day and paste it to another 
day. This will copy all four program periods and associated time and temperatures. To 
copy and paste a day profile:

•  From the day selection screen, use the arrow keys to highlight the day you wish 

to copy.

• Hold the 

ADV

 key for 2 seconds, ‘COPY’ will flash on screen to show it has copied,

• Use the arrow key to highlight the day to which you wish to copy the profile.
•   Hold  the 

ENTER

 key for 2 seconds, ‘PSTE’ will flash on the screen and the appliance 

will beep to signify the timers have been pasted successfully.

•  If required the same profile can then be copied to other days using the same ‘Paste’ 

procedure.

1.

   Hold 

ADV

 for 2 seconds on 

Monday (1)

2.

   Press 

UP

 until Thursday 

(4) is flashing

3.

   Hold 

ENTER

 to paste timers 

onto selected day

Flashing icon
Double Flash

23

Summary of Contents for PFH30E









































Reviews: