452114.66.71
FD 9305
EN-15
L14<
Wärmepumpenmanager
Englis
h
The quantity of thermal energy supplied by the heat pump during heating
operation is displayed here. For parallel operation (with intermediate heat exchanger:
DHW and heating), the thermal energy is included in the calculation here. The
quantity of thermal energy can be reset here.
The quantity of thermal energy for heating can be reset.
The total thermal energy for heating cannot be reset.
The quantity of thermal energy supplied by the heat pump during domestic hot water
operating mode is displayed here. The quantity of thermal energy can be reset here.
The quantity of thermal energy for domestic hot water can be reset.
The total thermal energy for heating cannot be reset.
The quantity of thermal energy supplied by the heat pump during swimming pool
operating mode is displayed here. The quantity of thermal energy can be reset here.
The quantity of thermal energy for the swimming pool can be reset.
The total thermal energy for the swimming pool cannot be reset.
Displays the ambient energy used
The ambient energy can be reset.
The total ambient energy cannot be reset.
Display of the last alarm message which occurred, including date, time and cause.
The last 10 faults can be shown by changing the number. The source temperature
(
), flow temperature (
), return temperature(
) and status value are shown on the
display for additional information.
Displays the last block which occurred, including date, time and cause. Up to 10
blocks can be displayed consecutively by changing the number. The source
temperature (
), flow temperature (
), return temperature(
) and status value are
shown on the display for additional information.
Displays the start and end of the last, fully completed initial heating program.
Displays the start and end of the last, fully completed initial heating program.
Display of runtimes and stored data
