12
Installation Instructions
Note: All the illustrations in this manual are for explanatory purposes only. Your
appliance may be slightly different. Be sure all accessories are removed from
the packing before use.
CHOOSE YOUR LOCATION
• If tipped more than 45°, allow the unit to set upright for at least 24 hours
before starting up.
• Place the unit on a firm, level surface in an area with at least 50cm of free
space around it to allow for proper air circulation.
• Do not operate in close proximity to walls, curtains, or other objects that
may block air inlet and outlet. Keep the air inlet and outlet free of obstacles.
•
Never
install the unit where it could be subject to:
• Heat sources such as radiators, heat registers, stoves or other products
that products that produce heat.
• Direct sunlight
• Mechanical vibration or shock
• Excessive dust
• Lack of ventilation, such as cabinet or bookcase
• Uneven surface
WARNING!
Install the unit in rooms which exceed 10 m
2
.
Do not install the unit in a place where inflammable gas may leak.
NOTE!
The manufacture may provide other suitable example or may
provide additional information about the refrigerant odour.
ATTACH THE EXHAUST HOSE
The air conditioner needs to be vented outside so that the exhaust air can
escape the room which coming from the appliance contains waste heat and
moisture.
Do not replace or extend exhaust hose, this will result in decreased efficiency
or even shut down the unit due to low backpressure.
Step 1:
Connect the hose connector to one end of the exhaust hose.
15429_Dimplex DPRC29ECO-B Manual.indd 12
15429_Dimplex DPRC29ECO-B Manual.indd 12
7/09/20 4:27 PM
7/09/20 4:27 PM