background image

16

www.dimplex.com

Wiring Instructions:

1.   Check product label for correct voltage and wattage. Make sure power source conforms to the heaters 

requirements.

2.   The junction box on the top of the heater has a gasket side access cover. The junction box inlet is drilled and 

threaded for a standard 19 mm (1/2

"

) weather tight conduit fittings. The installing electrician will need to provide the 

appropriate rigid metallic, flexible or liquid tight conduit, conduit fittings for installation location. 

3.  For outdoor installation all connections must be made in accordance with local electrical code regulations for 

outdoor wiring. Only use wiring components approved for outdoor use with minimum NEMA Type 4x or equivalent.

4.  Remove the screws holding the junction box cover. Make the electrical connections using wire nuts (not supplied). 

 

 For 120 V units: 

The green wire connects to the ground wire from the power source. The black wire connects to the 

live wire from the power source. The white wire connects to the neutral wire from the power source.

 

 For 240 V units: 

The green wire connects to the ground wire from the power source. The black wire connects to  

L1 (live) from the power source. The white wire connects to L2 (live) from the power source.

5.  Assemble the junction box cover & gasket. Ensure that the junction box cover gasket (supplied with unit) is installed 

to maintain rain water ingress protection rating of the heater. Failure to install correctly will void the manufacturer’s 
warranty.

Wall

Switch

Wall

Switch

Heater

Junction

Box

Heater

Junction

Box

Heater

Junction

Box

Heater

Junction

Box

120 V

Power

Supply

Breaker

Panel

120 V

Power

Supply

Breaker

Panel

240 V

Power

Supply

Breaker

Panel

240 V

Power

Supply

Breaker

Panel

240 V 15A

120 V 15A

L2

L1

G

L2

L1

G

L2

L1

G

G

L2

L1

L2

L1

L1

L2

Indoor Single Pole

120 V Switch

N (White)

L (Black)

G

G

L

N

L1

L1

G

G

L (Black)

N (White)

N

L

Use switch rated for outdoor

applications, if applicable

Indoor Double Pole

240 V Switch

Use switch rated for outdoor

applications, if applicable

Use GFCI breaker

for outdoor installations

Use GFCI breaker

for outdoor installations

Use GFCI breaker

for outdoor installations

Wall

Switch

Wall

Switch

Heater

Junction

Box

Heater

Junction

Box

Heater

Junction

Box

Heater

Junction

Box

120 V

Power

Supply

Breaker

Panel

120 V

Power

Supply

Breaker

Panel

240 V

Power

Supply

Breaker

Panel

240 V

Power

Supply

Breaker

Panel

240 V 15A

120 V 15A

L2

L1

G

L2

L1

G

L2

L1

G

G

L2

L1

L2

L1

L1

L2

Indoor Single Pole

120 V Switch

N (White)

L (Black)

G

G

L

N

L1

L1

G

G

L (Black)

N (White)

N

L

Use switch rated for outdoor

applications, if applicable

Indoor Double Pole

240 V Switch

Use switch rated for outdoor

applications, if applicable

Use GFCI breaker

for outdoor installations

Use GFCI breaker

for outdoor installations

Use GFCI breaker

for outdoor installations

Figure 14

Figure 15

Installation

Summary of Contents for DLW1500B12





















Reviews: