13
4
4
Install the wall-mounting bracket
!
NOTE:
If installing to the ceiling using
DGRPOLE (sold separately), skip this step.
1. Secure the mounting bracket to the wall
using 6 fasteners (not included). Ensure
suitable mounting hardware for the wall
material is used.
Installation
G
D
E
F
Figure 6
Figure 7
This side up
Secure the heater to the
mounting bracket
1. Install the heater to the mounting bracket
using hardware
D
,
E
,
F
, and
G
as shown.
5
5
Install Cords
1. Remove the finger protective rings from the
trigger.
2. Install the red cord to "ON" trigger.
3. Install the black cord to "OFF" trigger.
6
6
Red Cord
Black Cord
Figure 8
G
D
E
F
2. If using ceiling-mounting pole DGRPOLE
(sold separately), follow the installation
instructions provided with the DGRPOLE.
