9
Operation
at 1-888-346-7539 and press
4 for technical support. Please
have your model and serial
number ready when calling.
Remote Control
The remote control has a range of
approximately 50 feet
(15.25 m), it does not have to
be pointed at the fireplace and
can pass through most obstacles
(including walls). It is supplied
with 243 independent frequencies
to prevent interference with other
units.
Battery Installation
①
Depress tab on the battery
cover on the back of the remote
transmitter and remove battery
cover (Figure 2).
Figure 2
Batteries
Child Lock
②
Install two (2) aaa batteries
into the remote control (included).
③
Ensure child lock is in the
“unlocked” position.
④
Replace the battery cover.
!
NOTE:
When the “BaT”
symbol is present on the
remote control it is
recommended to replace the
batteries promptly, to maintain
full functionality of the remote/
fireplace. The remote
transmitter has a battery
backup time of only several
hours.
Battery must be recycled
or disposed of properly.
Check with your Local
authority or Retailer for recycling
advice in your area.
Initializing/Reprogramming
The Remote Control
①
Plug cord into 120 Volt wall
outlet.
②
Ensure the Main on/off
switch located in the switch box
on the fireplace in the upper
right hand corner is in the
on
position.
