15
Operation
Figure 18
WARNINg:
this electric firebox
must be properly installed before
it is used.
the unit can be controlled by
either the manual controls which
are located on the upper right of
the fireplace or the remote (Figure
18 & 19).
the fireplace is supplied with an Ir
multifunction remote control.
!
NOTE:
to operate correctly, the
remote control must be pointed
towards the Floating Display
TM
.
A. Standby
turns the unit on and off.
→ Activated by pressing the
Standby button on the remote
or the unit.
•
The unit will turn on with the
same functions that it was set
to when it was turned Off and
the intake temperature will be
indicated on the on Screen
Display.
!
NOTE:
When any button is
pressed the intake temperature
will be displayed on the on Screen
Display for 5 seconds.
B. Flame Effects
turns the flame effect on and off.
→ Activated by pressing the
button on the remote.
C. Heat ON/OFF
Cycles the unit sequentially through
the 3 settings: Low Heat, High Heat
and off.
→ Activated by pressing the
button on the unit or the remote.
Figure 19
A
D
B
C
E
g
H
F
A
C D
E F
Floating
Display
TM
