In order to prevent unintentional inclusion of the engine, disconnect the spark plug of the engine when
storaging device, transportation and all the works on cleaning and maintenance (such work is permitted
only with cooled engine).
The use, storage and maintenance of
Könner & Söhnen
tillers must be made according to this manual.
For all the damage and malfunctions, which were caused by mishandling of service, safety and working with
the machine manufacturer is not responsible.
STOPPING THE ENGINE
To stop the engine, reduce the engine speed by setting the engine speed lever to the “MIN” position.
THE MANUFACTURER IS NOT LIABLE FOR:
- Using of lubricants, gasoline and motor oil, which are prohibited by supplier.
- Using the device for other purposes.
- Losses due to further use of faulty tiller parts.
- Technical changes of the device.
MAINTENANCE WORK
All works shown in “maintenance ” section should be done regularly. If you can not perform work, tiller
user should contact the service center to complete an application for technical works execution. In case of
losses due to injury, acquired as a result of outstanding maintenance, the manufacturer is not responsible.
MAINTENANCE
7
MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGES:
- Damage and losses resulting from the use of non-original spare parts.
- Corrosive damage and other consequences of invalid storage.
- Damage caused by the maintenance works that were carried out by unauthorized personnel.
TILLER CLEANING
Thorough cleaning and care of the device extends its life and protects it from damage. After each use, clean
the tiller blades of the land, dust and grass straw. Keep under control the state of the product – damaged
parts, landing threaded elements.
It is forbidden to send jets of water on the seals, engine components and bearing seats. Otherwise the tiller
may need an expensive repair.
Oil pollutes soil and groundwater. Do not allow oil to
leak out of the crankcase. Drain used oil into a sealed
container. Return used oil to your local used oil collec-
tion point.
ATTENTION - DANGEROUS
The cultivator is delivered without oil and
fuel. Before the first start, be sure to fill the
device with oil and gasoline! Use a funnel
(not included) to fuel the device.
IMPORTANT!
REPLACING OR ADDING ENGINE OIL
Follow the maintenance schedule and check the engine oil level on a regular basis. When the oil level drops,
add fresh oil to ensure proper operation of the engine. To replace oil, proceed as follows:
www.ks-power.de/en
|
16
