DIMAX GROUP Konner & Sohnen 4260405362066, Manual

Page: 5 / 14

CONTROLLER:
INDICATORS AND CONTROL BUTTONS
6
(LH) Failed to connect power consumers to the generator.
+
(RH) Failed to connect power consumers to the mains.
+
Flash together when the generator is deenergized. +
ERROR OPTIONS:
ERROR OPTIONS:
Starter indicator – signals the operation of
the starter and flashes once per second in
preparation for the startup.
Engine preheat indicator – glows steadily when
the engine is preheated. The generator must be
equipped with an engine preheating system.
Engine indicator – glows steadily when the
engine is running. It flashes once per second in
preparation of the engine for the startup.
(LH) Generator power indicator – lights up
when power is supplied from the generator. It
flashes once per second in preparation for the
power supply.
(RH) Main power indicator – lights up when power is supplied from the mains.
Img. 2
Load connection indicator – glows steadily when
power consumers are connected.
Connection error indicator – flashes 4 times
per second and emits a beep when cables
or connections are damaged.
Power indicator – lights up when there is
voltage from the main power network. It flashes
once per second when testing the mains.
Engine fault indicator – flashes 2 times per
second and emits a beep after the engine
has failed to start after 3 attempts.
Oil pressure indicator – flashes 2 times per second and emits a beep when the engine oil pressure is low.
The generator must be equipped with an oil pressure sensor. (The ATS models do not have this function).
Battery voltage indicator – flashes 2 times
per second in the event of improper
battery voltage.
Engine start button – starts the engine in
manual mode.
Engine stop button – stops the engine in
manual mode.
Automatical mode button / indicator
– switches the ATS unit in AUTO mode,
lights up in AUTO mode.
Manual mode button / indicator – switches the
ATS unit in manual mode, lights up in manual
mode.
“Power switch” – ATS unit main switch.
www.ks-power.de/en |
4