Page
6
Version 1.1 Dec 2016
Setting the Local Time
This may only be set while the oven is in standby mode, and not working. When the oven is first connected to
power, by default “12.00” and “.” will keep flashing.
Use the “+” and “-” button to increase or decrease the value in order to set the local time.
Wait for a few seconds, local time is set. Cooking duration symbol is shown to indicate now the oven is
in manual cooking mode.
Setting the Timer
This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed.
Press the “Function Selection” button a few times until the “Alarm” symbol begin to flash. Default
timer 0.00 is shown.
Use the “+” and “-” button to increase or decrease the value in order to set the alarm. Setting range is
from “0.01”to “23.59”.
Timer is set when the “Alarm” symbol is no more flashing. Press “Function Selection” button to see the
local time. Timer countdown can be observed in the timer setting mode. Display will show in seconds if
the countdown is less than 1 minute. When this period of time has elapsed, the buzzer will ring for 7
minutes. Press either “+”or “-” button to cancel to buzzer.
Alarm is cancelled if it is set to “0.00”.
Program Cooking
A cooking function must be selected before programming can take place.
Setting Cooking Duration
Press the “Function Selection” button a few times until the “Auto” and “Cooking Duration” symbols
begin to flash.
Use the “+” and “-” button to increase or decrease to set the cooking duration. Cooking duration can be
set to the maximum at “10.00”.
Cooking duration is set when the symbol and local time is displayed.
When the set time has elapsed, the oven will stop cooking and the buzzer rings for 7 minutes. Press
either “+”or “-”button to cancel the buzzer.
Cooking duration is cancelled if it is set to “0.00”.
Setting End Time for Cooking
Cooking duration is set beforehand : Time Delay Function
Press the “Function Selection” button a few times until the “Auto” symbol begins to flash, use the “+”
and “-” button to increase or decrease to set the cooking end time.
The cooking end time must be greater than “local time + cooking duration”. However, it should not
exceed “local time + 23hour 59min”. The oven will start cooking automatically when the local time
reaches “cooking end time – cooking duration”.
When the set time has elapsed, the oven will stop cooking and a buzzer rings. Press either “+”or
“-”button to cancel the buzzer.
Heat Delay is cancelled if the cooking end time is set to “local time + cooking duration”.
