manualshive.com logo in svg

diLUSSO FS605G4AS, Installation And Operating Manual, Page: 19 / 33

Share
Download
diLUSSO FS605G4AS Installation And Operating Manual Download Page 19

Digital Clock

The clock is displayed in  24-hour time. When the oven is connected to the power for the  

first time or after a blackout, three zeros will flash on the programmer panel. To set the oven  

clock local time please press        and        buttons simultaneously, and adjust by pressing [+]  

and / or [-] buttons until you have the correct time. Holding down the [+] and [-] button will  

increase the speed of the minute setting.

Manual cooking without using the programmer

To operate the oven manually, that is without using the auxiliary programmer, it is 

necessary to cancel the flashing           by pressing         and        buttons at the same time 

to set it on manual mode. 

Automatic cooking programming (start and finish)

1) Set the cooking duration (the length of time oven is to be on) by pressing        button.

2)Set the end of cooking time (local time to turn off oven) by pressing        button.

3)Set the temperature and cooking program by using the temperature control  knob and 

    the function selector knob.

The         symbol will flash, this means the oven has been programmed.

For example: cooking duration to be 45 minutes and is to finish cooking at 14.00.

- 

Press        and set to 0.45

- 

Press        and set to 14.00

- Select temperature and oven function

The Local time 

 will appear on the panel and       symbol will be on. This means the 

cooking program has been entered to the programmer.

At 13.15 h. (45 minutes to 14.00) the oven turns on automatically. During cooking, both  

           button and         are flashing.

At 14.00 h. the oven turns off automatically, a buzzer rings until it is stopped by 

pressing any function key button.

B. To set the time cooking is to finish

A) Select desired temperature and oven function. Set the length of cooking time by pressing 

     the        button. The oven will turn on immediately.        and the        symbols will flash. At 

     the end of set duration, the oven will turn off, a buzzer will ring until it is stopped as 

     described above.

B) Select desired temperature and oven function. Set the time cooking is to finish at by pressing 

     the          button. The oven will turn on immediately.          and       will flash. The oven will 

     automatically turn off at the preset end time and the buzzer will ring until it is stopped as 

     described above.

                                                                                                                                                                                                                                                                           Page 18                         

Semi Automatic Cooking

There are two options :

A. To set the length of cooking time

Summary of Contents for FS605G4AS


































Reviews:

No comments