Electrical Connection
WARNING: THIS APPLIANCE MUST BE EARTHED
For a direct connection to the electric network is necessary to mount a circuit breaker
before the appliance according to the electrical regulation.
Before making connection to the electrical network, check that the domestic system and
the limiter valve can take the appliance load.
The supply cord must be positioned at such point where the temperature of the point is
NOT possible to reach 50K or higher than the ambient temperature.
Means for disconnection must be incorporated in the fixed wiring in accordance with the
wiring rules.
If this product is to be connected to a new or upgraded electrical installation, then it must
be connected to the supply by a supply cord fitted with:
−
an appropriately rated plug that is compatible with the socket-outlet fitted to the final
subcircuit in the fixed wiring that supplies this cooking range; or
−
an appropriately rated installation male connector that is compatible with the installation
female connector fitted to the final sub-circuit in the fixed wiring that supplies this cooking
range.
Before connecting to the mains, make sure that:
The supply system is regularly earthed, according to the regulations in force.
The isolation switch can easily be reached after the appliance is installed.
After connection to the mains, check that the supply cable does not overheat.
Never use reductions, shunts, adaptors that can cause overheating or burning.
Page 9