Version 1.3
June 2018
Operating Instruction
Control Panel
Light
The lighting can be turned ON/OFF independently by pressing the switch button without relying on the range hood fan status.
Fan
The fan is turned ON/OFF by pressing the fan switch button. The fan can run at three different speeds (Speed 1
/ Speed 2
/Speed 3).
Cleaning and Maintenance
Caution: Prior to cleaning or maintenance, always disconnect the power supply.
Do not use a steam cleaner.
General Maintenance
In order to have your range hood retain its new appearance; regular cleaning and care should be performed to protect the
stainless steel finishes.
Never use gritty or abrasive sponges. Stainless steel cleaners and protectors are recommended. Stubborn stains can be
removed by soaking in hot water, standard stains can be removed by applying a clean cloth soaked in soapy water before
spillage becomes cold or dries up. Acid materials like milks, vinegar, citrus etc can damage the stain resistant surfaces.
Note : Use only damp cloth to clean the stainless steel panel with printed words and labels. Stainless steel cleaners and similar
products may remove the print.
Warning: a build‐up of oil may occur if the range hood is not cleaned regularly
Filter Maintenance
To maintain the range hood efficiency, filters should be cleaned regularly (approximately monthly), and washed using warm
soapy water or in the dishwasher.
Note: Frame discolouration may occur if the filter is washed in a dishwasher.
Range hoods fitted with charcoal filters are designed to remove grease and odours from cooking vapours before the cleansed
air re‐entering the kitchen (range hood in recirculation mode). Charcoal filters should be replaced every two to four months
depending on range hood usage.
Note:
Fully saturated charcoal filters can become a barrier to air movement therefore limiting range hood performance
Page 8
