TURBO function
The TURBO function makes the unit work extra hard to reach your present
temperature in the shortest amount of time possible.
● When you select TURBO feature in COOL mode, the unit will blow cool air
with strongest wind setting to jump-start the cooling process.
● When you select TURBO feature in HEAT mode, for units with Electric heat
elements, the Electric Heater will activate and jump-start the heating process.
● Hold down TURBO button for 2 seconds, the Ionizer/Plasma Dust Collector
(depending on models) is energized and will help to remove pollen and
impurities from the air.
Silence function
Hold down Fan speed button for 2 seconds to activate/cancel Silent mode.
Due to low frequency operation of compressor, it may result in insufficient
cooling and heating capacity. (applicable to the air conditioner with Silent
feature only)
8°C Heating Function
When the air conditioner operates under heating mode with the set
temperature of 17°C, press Temp button twice in one second will activate 8°C
heating function.
The unit will operate at a setting temperature of 8°C. The indoor unit display
shows "FP".
Hold down Fan
button for 2
seconds to activate
Silence function
Hold down this button
for 2 seconds to
activate fresh function
Press this button
twice in one second
to activate 8°C
heating function
SHORTCUT function
Used to restore the current settings or resume previous settings.
Push this button when remote controller is on, the system will automatically revert back to the previous settings
including operating mode, setting temperature, fan speed level and sleep feature (if activated).
If pushing more than 2 seconds, the system will automatically restore the current operation settings including
operating mode, setting temperature, fan speed level and sleep feature (if activated ).
4
Split-type room air conditioner / User Manual
56 / 106 EN
REMOTE CONTROL OPERATION
