■ Remote control specifications
Models
3.0V(Dry batteries R03/LR03×2)
Rated voltage
3.0 V (alkaline dry batteries R03/LR03 X 2)
Reaching distance signal range
8 m
Environment
-5°C ~ 60°C
Note:
●
Buttons design is based on typical model and might be slightly different from the actual one you purchased, the
actual shape shall prevail.
●
All the functions described are accomplished by the unit. If the unit has no this feature, there is no corresponding
operation happened when press the relative button on the remote controller.
●
When there are wide differences between Remote controller Illustration and USER'S MANUAL on function
description, the description of USER'S MANUAL shall prevail.
■ Introduction of function buttons on the remote controller
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control. The
following is a brief introduction to the remote control itself. For instructions on how to operate your air conditioner, refer
to the How to Use The Basic/Advance Functions section of this manual.
Note: Please do not select HEAT mode if the machine you purchased is cooling only type. Heat mode is not
supported by the cooling only appliance.
ON/OFF Button:
Push this button to start operation, push the button again to stop operation.
MODE Select Button:
Each time you push the button, a mode is selected in a sequence as the following
figure:
FAN Button:
Used to select the Fan Speed in four steps- AUTO LOW MED or HIGH. Each time the
button is pressed, the fan speed mode is shifted.
Note: Holding this button down for 2 seconds will activate Silence feature.
ECO Button:
Press this button to go into the Energy-Saving operation mode. Press it again to
cancel. This function is only can be used on COOL, HEAT and AUTO mode and
maintain the most comfortable temperature for you.
TURBO Button:
Enables unit to reach pre-set temperature in shortest possible time.
If hold down this button for more than 2 seconds, the Fresh feature is activated.
TEMP + and TEMP - Button
Warning: This remoter is universal,
Some operations/functions may not be
supported by all versions of the indoor
unit models.
These keys make it possible to set the desired ambient temperature. TEMP + the requested temperature is increased
up to 30°C TEMP - the requested temperature is decreased down to 17°C. Every time the key is pressed the
temperature is changed with 1°C.
SHORTCUT Button
4
Split-type room air conditioner / User Manual
49 / 106 EN
REMOTE CONTROL OPERATION
