GTX-Plus Series User’s Manual REV 3.0 01/03/2013
16
To set the constant factor, Use LEFT ARROW key to move the
cursor point to FACTOR constant. Use UP and DOWN keys to change the
value, press and hold to scroll values.
To set the unit factor, Use RIGHT ARROW key to change the unit,
press and hold to scroll change.
Press ENTER to save setting and return to setup menu page.
*All Data in Database will be deleted if you change setting.
1.6) AUTO AVERAGING This function allows the average load
reading to be displayed. The average starts being calculated when the
start trigger condition occur and stops when the stop trigger condition
occur. When this feature is Enabled, one addition Measure mode can be
selected using the MODE key from the main display.
averaging mode
symbol
Stop Timer (secs)
averaging value
Figure 12 Auto Averaging mode
*In this mode save database by press ENTER key for 0.5 sec
To access AUTO AVERAGING menu, Press UP and DOWN to move
the cursor point to AUTO AVERAGING and press the ENTER key the
display will show the Pass-Fail menu page. Press ESC key to return the
setup menu page.
AUTO AVERAGING MENU
1) START,STOP OPTION
2) SETTING
Figure 13 Auto Averaging Menu
1.6.1) START,STOP OPTION This function selects the Auto
Averaging start and stop option.
To access START,STOP OPTION menu, Press UP and DOWN to
move the cursor point to START,STOP OPTION and press ENTER key the
