GTX-Plus Series User’s Manual REV 3.0 01/03/2013
18
Use LEFT ARROW keys to move cursor point to the desired value.
Use UP and DOWN keys to change the value, press and hold to scroll
values. Use RIGHT ARROW key to change the unit. Press ENTER to save
setting and return to Setup menu page.
1.7) LOAD DEFAULT The GTX Plus may be returned to its
original factory default setting.
To set factory default, Press UP and DOWN to move the cursor
point to LOAD DEFAULT and press ENTER key the display will show Load
Default menu page. Press ESC key to return to the setup menu page.
LOAD DEFAULT
AUTO-OFF = OFF
LOWER LEVEL = 0 %
UPPER LEVEL = 0 %
PERCENT DROP = 0%
FILTERING = HIGH
AUTO AVERAGING = OFF
Figure 14 Load default Menu
Press ENTER key to Load default setting and return to setup
menu page.
1.8) SELECT OUTPUT Although the GTX Plus’ default setting is
USB, you can switch the output port to PS2(RS232) and back.
To select output port, Press UP and Down to move the cursor
point to SELECT OUTPUT and press ENTER key the display will show
OUTPUT MENU page, Press Up and Down to move cursor point to your
port and press Enter key. Press ESC key to return the setup menu page.
OUTPUT MENU
1) USB OUPUT
2) PS/2 OUTPUT
Figure 15 Select Output Menu
