13
3. You now have two choices, A or B:
A. Accept the displayed ID by
pressing either
GROSS /
PEAK
or
PRINT / SELECT
. . .
GROSS / PEAK
takes you directly
out to the gross mode.
PRINT /
SELECT
displays
ID
.
Or
B. Enter a new ID of up to seven
digits. Use the data entry
procedure shown in the
section,
Entering Data with
Arrow Keys
. Then press
PRINT / SELECT
. . .
The new ID number is accepted and
ID
is displayed.
The arrow keys are used to enter data for the ID number, cutoff numbers,
time, and date. Refer to this section whenever the manual instructs you to
enter data
for one of those parameters.
Entering data is all done through a single edit character position on the
display. The
UP ARROW
key increments the digit displayed in the edit-
character position up to the value needed, and the
LEFT ARROW
key moves
the configured digits to the left, out of the way, and brings up a new zero digit
in the edit-character position. The FI-90 allows you to enter up to seven
character positions of data.
To teach the procedure, we'll show you how to enter the three-digit ID num-
ber,
603
. The same keying principles generically apply to your entry of ID,
cutoffs, time, and date.
1. Starting from a display of the
current identification number (the
outcome of step 2 under
Entering
or Viewing an ID Number
), press
the
UP ARROW
key. . .
First, a zero is displayed
in the edit character
position, indicated here by
an arrow. Only in the edit-
character position can
you edit the numeric value of a digit
upward or downward.
Entering Data with Arrow Keys
Introduction
ID Number as an
Example
If at any time you enter an
incorrect character, press
ZERO / CLEAR to backspace
and delete the wrong character,
then re-key.
Summary of Contents for FI-90
Page 1: ...Dillon FI 90 Force Indicator User s Manual ...
Page 23: ...23 ...
