17
Two special modes can be flagged with the Poll value:
· A Poll value of zero places the remote in Manual Poll mode. The remote
will only poll the instrument when the UNITS key is pressed by the
operator. The ED-2000plus will reply and the HR will display the reading
until the unit is polled again (or until the screen blanks after ten seconds
of non communication). Manual poll mode is designed for situations in
which constant updates are not necessary, to conserve battery life or
reduce airwave clutter.
· A Poll value of 255 places the unit in Monitor mode. The instrument is
completely passive and only
ON/OFF
or
F
+
ON/OFF
keys are functional.
It will need a second HR-2000 operating actively, and the
dEStin
and
SourcE
address must match the active HR-2000 exactly. The passive
HR-2000 will display any traffic FROM the ED-2000 TO the active
HR-2000, as long as it is within receiving distance. Monitor mode is
designed for situations where a second remote is required for the same
ED-2000plus.
7. Press the UNITS key to save the
change and move to the next
item. . .
dEStin
is displayed while the key is
pressed then the destination value.
You are now back at the top of the
list of items in address mode.
