Thank you for choosing Dillinger Labs Dani — a
SKAA Pro wireless audio Transmitter designed for
pro audio applications.
• SKAA / SKAA Pro dual-mode Transmitter with 50
meter range, DC-coupled Burr Brown input
buffers and Burr Brown converters, balanced /
unbalanced line level inputs as well as Thrus for
daisy chaining
• Companion to the Streetheart SKAA / SKAA Pro
Receiver — 1 Dani can feed up to 4 Streethearts
• Pro-grade SKAA wireless audio. 100% Bluetooth
free. 100% WiFi free.
• Works with all SKAA Receivers and all SKAA
Nadja Hubs (in satellite/receive) mode —
including all SKAA-equipped speakers such as
those from Soundboks
• Designed specifically to upgrade virtually any
piece of source-side pro audio gear to SKAA /
SKAA Pro wireless
• Perfect for upgrading your DJ deck, live sound
mixer or recording interface to SKAA wireless
• Ideal for replacing long XLR or TRS cable runs —
for this application we recommend you use
Streetheart Receiver(s) on the audio sink side
• Accepts 2 discrete audio channels on two
¼
″
jacks, transmits them wirelessly via SKAA/SKAA
Pro and also outputs them on the Thru jacks
• Accepts hot input signals up to +24dBu
• Perfect for creating a wireless Headphone
solution for DJs or cue mix system for studio
• Need to add an extra pair of monitor speakers to
the “band room” in your studio? Upgrade a pair
of powered monitors with a single Streetheart to
fill that remote room with low-latency audio, and
feed them from your control room with Dani
Introduction
For the curious and intrepid few
who’ve always wondered what this
meant but were too afraid to ask …
The SKAA® standard for wireless audio
guarantees compatibility between all
products bearing the SKAA Compatible
Badge. SKAA Transmitters work with iOS &
Android mobile devices, Mac & Windows
computers, televisions and any product
having a line output, S/PDIF output or a
headphone jack.
SKAA semiconductor components enable
SKAA to be embedded in consumer audio
and pro audio products. Not based on
Bluetooth or WiFI, SKAA is a global standard
built from the ground up specifically for
audio. Learn more at
• Love your powered PA speakers? Great —
convert them to lightning-fast SKAA
wireless by adding Streethearts to them —
then feed them wirelessly with your Dani
• Connect Dani to your DJ deck to feed your
Soundboks speakers directly with low
latency SKAA Pro wireless
• Select -10 dBV using the Level Switch on
Dani’s input panel and you can feed Dani
with consumer-grade audio sources such as
your phone or computer
• Dani will run for 14 hours from a full charge
using its internal rechargeable Li-Ion
battery
We like to make our products easy to use and Dani is no exception !
Still, to fully unleash the considerable capabilities of this shiny new work of art, we vehemently advise
you to read the Owner’s Manual. Its pages are brimming with juicy morsels of invaluable insights,
irreverent commentary, and other assorted nuggets of paradigm-altering revelation. We really put our
foot in this one so we hope you love your Dani as much as we do !!
