9
FRoNT WHEEl
Simply insert the front wheel into the front forks, with the brake disk lined up to fit into
the brake calipers. If the front does not fit, loosen the thumb screw on the axle as shown
below. Tighten thumb screw to adjust torsion of the axle level. Close the lever to fix wheel
to front forks.
Note: It may be easier to do this step with the bike flipped over on its seat and handlebars. Just
be careful of the display on the ground you are constructing on.
Wheel is place into the axle slot
Thumb screw adjusts torsion of lever
Once thumb screw has been adjusted to desired torsion close the lever firmly
