DIGMA smart home DiVision 600, User Manual, Page: 9 / 44

9
5. ADVANCED SETTINGS
1. The device is equipped with the voice alerts for operation modes/states. Quickly press the control/
reset button once to deactivate the voice alerts. After releasing the button you will hear a confirmation
sound.
Quickly pressing the control/reset button again reactivates the voice alerts.
2. The user can set up/change the following parameters in the camera’s advanced settings menu*:
• Change the device name
• View the list of trusted users that have access to the device
• View the basic device information
• Enable/disable the date/time display
• Configure the motion detector settings
• Configure the settings for recording to a memory card
• Check for firmware updates
• Cancel/remove the device link to the current account (required to link the camera to another account).
3. The user can access the following functions in the account settings menu (My Account)*:
• Account profile setup
• Message Centre access — view the events for which notifications have been received
4. In the “Scripts” section, the user can configure various scripts to run automatically upon trigger events,
or run scripts manually.
5. Using a wired connection.
A wired connection to the local network is used as the primary or backup link to the Internet.
Wired connection becomes possible only after the initial device is fully configured and linked to an
account.
*The list of available functions may be changed during the system refinement process