DIGMA smart home DiVision 600, User Manual, Page: 8 / 44

8
5. Put the device in the configuration mode by pressing and holding the on/off button (you will
hear a confirmation sound, and then the voice messages “Reset to factory settings” and “Network
connection required”).
6. Follow the instructions of the setup wizard on the mobile device screen:
• Make sure your mobile device is connected to a Wi-Fi network compatible standard and enter the
access password
• Click “Continue” / “Next Step” and follow the further instructions of the setup wizard.
• After you are connected to the network, give the device a suitable name and complete the setup.
After the setup has been completed, the camera is ready for use and will appear in the list of
connected devices on the main screen of the app in “My Devices” section.
To view the image from the camera, click on the line with the camera name on the main screen.
A viewing window will open. The following controls are available in this window:
1 Date/Time display
2 Advanced settings menu button
3 WiFi signal indicator
4 Enabling the audio channel
listening
5 Change the viewing quality
6 Switching to the full screen mode
7 Switching between the online and
recorded video
8 Quick setup of the motion
detector
9 Activating the two-way
communication
10 Camera tilt and rotation control*
11 Video recording
12 Screenshot
*For cameras with the rotary
mechanism
1
11
8
7
4
5
2
3
6
10
12
9