DIGMA smart home DiVision 600, User Manual, Page: 7 / 44

7
4. GETTING STARTED
Attention!
Before turning on the camera, make sure that the external WiFi antenna is securely fastened in the
appropriate connector on the device. Turning on the camera without an antenna installed may cause
damage to the device.”
An initial setup must be performed in order to manage the device via the mobile app. To do this:
1. Connect your mobile device to a 2.4 GHz standard wireless network.
Attention!
The wireless network settings must follow the mentioned below conditions for the device to work
correctly:
• The Hide Network ID (SSID) feature is disabled
• It must be used encryption method WPA_PSK / WPA2_PSK
• Dynamic Host Configuration Protocol (DHCP) must be activated
• The access point name must contain Latin characters only
2. Download the DIGMA SmartLife app from the app store on your mobile device.
3. Launch the DIGMA SmartLife app. Register your account by following the tips on the screen
(for new users), or log in using your existing credentials.
4. Go to “My devices” / “My group”. Click the “+” icon in the upper right corner to add a device and
select the device type “Smart Camera”. In the window that opens, click the setup wizard selection
button in the upper right corner and select one of the configuration methods supported by the
camera: “QR code” (recommended) or “Quick setup” (if the recommended method did not work).