Digium, Inc.
Page 37
Chapter 2: Card Installation
3.
If this is the first Asterisk installation on this system, you should install
the sample configuration files. To do this, run:
# make samples
Note:
Running this command will overwrite, after making a backup
copy, any older Asterisk configuration files that you have in the /etc/
asterisk directory.
If your installation has failed, it may be because you are missing one
or more of the build dependencies, the kernel headers, or the
development tools. Please contact your reseller where the card was
purchased, or call Digium Technical Support (+1.256.428.6161) for
assistance.
Complete instructions for installing Asterisk are available at
www.asterisk.org
.
