Digium, Inc.
Page 26
Chapter 2: Card Installation
To utilize this feature, daisy-chain the P3 connector between each TE430
Series card using the Digium 4-position timing cable. See Figure 6 on
page 26 for an example. Enable this feature in the drivers using the
timingcable=1
switch when the drivers are loaded:
# modprobe wcte43x timingcable=1
Figure 6: Timing Ports Example
Timing port cable part number: 3112-00001
Four (4) port interlocking timing cable for use with dual and quad span
(TE2XX and TE4XX) series of digital cards.