Chapter 2: Card Installation
3:00.0 Network controller: Digium, Inc. Wildcard
TE133 single-span T1/E1/J1 card (PCI-Express) (rev
01)
Note:
The output from
lspci
may or may not state “Unknown
device.” If it does, this does not indicate a problem.
3.
Download the latest version of libpri (1.4 or later). Substitute the
version of libpri for the X.X in the command line below. libpri is
available for download from:
http://downloads.digium.com/pub/telephony/libpri
# wget http://downloads.digium.com/pub/telephony/
libpri/libpri-X.X.current.tar.gz
4.
Expand the downloaded file, compile its contents, and install the
libraries. Substitute the version of libpri for the X.X and X.X.X in the
command lines below.
# tar -zxvf libpri-X.X-current.tar.gz
# cd libpri-X.X.X/
# make
# make install
Note:
There is no correlation between the versioning of libpri and
Asterisk. The libpri 1.4 branch will function with the Asterisk 1.8
branch.
Digium, Inc.
Page 31