Cascade Chain Connection
1. Plug DC 5V/2A power adapter.
2. Use UTP Cable connected with Receiver to link the other two (2) Receiver Units
consecutively to extend another 100m distance, the cable connector node is to
connect to Receiver LINE1 or LINE2 or LINE3 port (RJ45), as long as the LINE
port is not occupied, and user can continue expanding corresponding to custom
demand as likely Cascade/Tree Chain web architecture spread.
3. Connect the IR Receiver cable or RS-232 to 3.5mm adapter to the Receiver Unit
IR Port or RS-232 port if necessary.
4. Connect Receiver with DisplayPort cable to DisplayPort connector of Display
Monitor.
Each Receiver with three (3) Line port, one is used for source input, and the other
two are used for expanding source to other receivers. User can choose any LINE port
as source input at random, and use the other two LINE port for expanding source to
next tier receiver as long as the LINE port is not occupied.
