Digitus DS-56200, User Manual

Page: 9 / 10

IR Bypass Function Connection

Connect the IR Transmitter (or Emitter) cable to the IR Connector on the
DisplayPort
Transmitter Unit (TX)

Connect the IR Receiver cable to the IR Connector on the DisplayPort
Receiver Unit (RX)

Place the IR Eye of the IR Receiver cable near the Remote Controller

Place the IR Blaster of the IR Transmitter cable near the device that intend to
be controlled by the Remoter controller
RS-232 Bypass Function Connection

Connect the device, such as a PC, projector…etc, to the RS-232 port of the
DisplayPort Transmitter Unit or DisplayPort Receiver Unit via a RS-232 to
3.5mm adatper

Connect the controlling device to the RS-232 port of the DisplayPort Receiver
Unit or DisplayPort Receiver Unit via a RS-232 to 3.5mm adapter