11
CONCATENATION
This RAID array allows you to use one, two, three or four hard drives
to a array. It does not provide any data protection or performance
improvement but can be useful for utilizing leftover space on disks.
1. As the BIOS boots press
Ctrl+F4
or
F4
when prompted to enter the RAID BIOS.
2. At the next screen select
Create RAID Set
, then press
Enter
.
3. Select
CONCATENATION
, then press
Enter
.
4. Select the number of drives then press
Enter
.
5. Select
the
first drive
, press
Enter.
6. If applicable select the
2nd, 3rd, 4th
drive pressing enter after each selection.
7. When
asked
Are You Sure(Y/N)?
, press
Y
to accept.
8. Press
Ctrl+E
to exit the BIOS.
9. When
asked
Are you sure to exit(Y/N)?
,
press
Y
to exit and reboot.
10. Continue with FDISK and FORMAT steps as
if you were installing a conventional hard drive.
Deleting RAID Arrays
1. As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter the
RAID BIOS.
2. Select
Delete RAID Set
, then press
Enter
.
3. Select the RAID set then press
Enter
.
4. When
asked
Are You Sure(Y/N)?
, press
Y
to confirm.
