6
6.
Installing and Connecting the Switch
This part describes how to install your Ethernet Switch and make connections to it.
Please read the following topics and perform the procedures in the order being
presented.
6.1 Installation
Please follow the following instructions in avoid of incorrect installation causing device
damage and security threat.
Put the Switch on stable place or desktop in case of falling damage.
Make sure the Switch works in the proper AC input range and matches the voltage
labeled on the Switch.
To keep the Switch free from lightning, do not open the Switch's shell even in power
failure.
Make sure that there is proper heat dissipation from and adequate ventilation around
the Switch.
Make sure the cabinet to enough back up the weight of the Switch and its
accessories.
6.1.1 Desktop Installation
Sometimes users are not equipped with the 19-inch standard cabinet. When installing
the Switch on a desktop, please attach these cushioning rubber feet provided on the
bottom at each corner of the Switch in case of the external vibration. Allow adequate
space for ventilation between the device and the objects around it.
6.1.2 Rack-mountable Installation in 19-inch Cabinet
The Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be placed in
a wiring closet with other equipment. To install the Switch, please follow these steps:
1)
Attach the mounting brackets on the Switch's side panels (one on each side) and
secure them with the screws provided.
