2
1.
Introduction
The DIGITUS 16-Port Gigabit Rack mount Switch with sixteen Power over Ethernet ports
and two additional SFP Fiber Port, offers your network significant improvement in
terms of performance and efficiency. Thanks to PoE support, you only need a single
(network) cable for power and data transfer. This switch makes it much easier to
connect devices such as access points, network cameras, and IP telephones, and
requires far less cabling than alternatives. It also allows you to extend your network in
places where there are no power supply cables or sockets available. The switch does
not require any configuration and therefore guarantees quick and seamless integration
into the network. Moreover, can be manually switched to a Normal mode, or Flow
Control mode, or VLAN mode to suitable for various occasions flexibly. Based on Gigabit
Ethernet Technology, it is essential to helping solve network bottlenecks that frequently
develop as more advanced computer users and newer applications continue to demand
greater network resources.
2.
Features
Comply with IEEE 802.3i, IEEE 802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x,
IEEE802.3az standards
Support IEEE802.3af, IEEE802.3at standards
Supporting Normal mode, VLAN mode and Extend mode, flexible to switch
The maximum output power of a single port is 30W, and the total output power of
PoE is 247W.
16 x 10/100 /1000 Mbps self-adaptive RJ45 ports, support port auto flip (Auto MDI /
MDIX)
Flow control method: Full-duplex adopts IEEE 802.3x standard, half-duplex adopts
Backpressure standard.
Support MAC address self-learning
The UTP port supports the auto-negotiation function and automatically adjusts the
transmission mode and transmission rate
Use store-and-forward architecture
3.
Package Contents
1x 16 Port Gigabit PoE Switch, 19 Inch,
Unmanaged, 2 SFP Uplink
1x Power Cable
1x QIG
