7
3.4 Frequently-used functions
3.4.1 Record
To record remotely, click “
” or “
”
→
“
” to go to the “Record Setting” page.
In the “Record Setting” page, you can set the following items:
Record type
Pre- / post-event record time (0~10 seconds)
Record time setting
Record path
Note: The record function will be disabled when the reserved disk capacity in “Reserved(MB)” is larger
than the current disk capacity in “Free(MB)”.
When “Manual” is checked, click “
” or “
” on the main control panel to start the manual recording
immediately, and the recordings will be saved in the location specified in “Record Path”.
When “Motion” and / or “Alarm” are checked, the recording function will be enabled for any motion or alarm event,
and the recordings will be saved in the location specified in “Record Path”.
