Digitus DN-13005, User Manual

Page: 5 / 77

2.3 Physical Description
2.3.1 Ethernet Connector
The network connector of this Server is designed for 10 Mbps or 100 Mbps Ethernet
networks and connects to the network via a twisted pair category 5 cable (10baseT
and 100baseTX) or better.
2.3.2 USB Host Ports
This Server has two USB host ports which are USB 1.1/2.0 low, full, and high speed
compliant and successfully tested with USB 1.1/2.0 printers, Mass Storage, and
AIP/MFPs.
2.3.3 Init Button
The Init button is used for:
„
printing a page of configuration report to check the connection to the printer
and showing the MFP server settings
„
performing a Factory Default of the Server, which will restore most of the
parameters and settings to factory default values
„
performing the new firmware upgrade using in fallback
2.3.4 Indicators
„
Power Indicator is lit while power is applied. If it is not lit, or if it blinks, there
is a problem with MFP server or Power Adapter.
„
Link Status is lit while network is applied. If it is not lit, it indicates that the
server does not connect to network.
„
Status Indicator blinks to indicate network activity.
„
USB1 Indicator is lit while an USB device connects to USB1 Port of MFP server.
If it is not lit, or if it blinks, there is a problem with the USB device or the MFP
server.
„
USB2 Indicator is lit while an USB device connects to USB2 Port of the MFP
server. If it is not lit, or if it blinks, there is a problem with the USB device or
the MFP server.
5