Digitus DN-13005, User Manual

Page: 4 / 77

Chapter1 Introduction
Thank you for purchasing this Digitus DN-13005 USB MFP Server (in the following
referred to as “Server”). This server is designed to connect your AIO/MFPs
(All-In-One/Multifunction Peripheral), printers, USB mass storages (hard drives, flash
drives, and memory card readers), and scanners, to your network, allowing all
network users access to these shared USB devices resources.
1.1 About this Manual
This manual provides introductory information as well as detailed instructions on how
to set up and manage this server in various network environments. To fully benefit
from this manual, you should be familiar with basic networking principles.
These instructions are based on the settings in a new MFP server. To reload the Factory
Parameters, you can reset this server back to Factory Default, which will restore most
of the settings. For details, please refer to the chapter “Restore Factory Defaults”.
1.2 Support Services
Should you require any technical assistance, please contact your product reseller. Or
you can visit our website at
http://www.digotus.info for latest product information.
This manual is subject to changes without prior notice.
Chapter2 Product Overview
2.1 Package
Contents
Verify that nothing is missing from the package by using the checking list below.
Please contact your dealer if anything is missing or damaged. All packing materials are
recyclable. Please confirm the items in the package below:
„
This Server
„
CD (Control Center and User’s Manual)
„
Power Adaptor
„
Quick Installation Guide
2.2 Product CD
This CD provides an easy-to-use Control Center software for Windows PC, and the
User’s Manual.
2.2.1 Start-up Procedures for Windows
If your computer is configured to auto start CDs, this CD will start automatically when
inserted. You can also navigate to the CD and start the autorun.exe file from within the
Windows file manager.
4