background image

 

16

Note:  
In the event of incorrect installation and improper use in a residential area, the device 
may cause disruptions in radio devices and other electronic devices. Proper use means 
that the device is operated with shielded connector cables as far as possible, for network 
products also with shielded cables of category 5e and higher. The device was tested and 
lies within the limits for computer accessories of class A according to the requirements of 
EN 55022. 
 
Warning! 
This is a class A device. This device can cause radio interference in residential areas; in 
this case, the operator may be required to perform and bear the costs for appropriate 
measures.  
 
Conformity Declaration: 
The device fulfils the EMC requirements of EN 55022 class A for ITE and EN 55024. 
Devices with external or built-in power supply also fulfil the requirements of EN 
61000-3-2 and EN 61000-3-3. The basic protection requirements of the “EMC Directive” 
89/336/EEC are therefore fulfilled. The CE conformity has been certified. The 
corresponding declarations are available from the manufacturer. 
 
Trademarks: 
All company, brand and product names used in these instructions are trademarks or 
registered marks of the corresponding companies. 

Summary of Contents for DA-80200

















Reviews: