6.3.
Bi-directional IR pass back
It supports bi-directional IR pass back. User cans control DVD at TX end and
control TV at RX end.
If control at RX end, please connect IR blaster extension cable with IR OUT of
TX and connect IR receiver extension cable with IR IN of RX. If control at TX
end, please connect IR receiver extension cable with IR IN of TX and connect
IR blaster extension cable with IR OUT of RX.
6.4.
FAQ
Q: No image output?
A: Check the led indicator status to make sure all connections is good and
stable.
Q: Signal led “3” is flashing but no image output?
A: Check if the HDMI display device has been switched to the right HDMI
input channel.
Q: Signal led “2” is flashing but “3” light is off?
A: Check whether the TX's HDMI IN has signal input and make sure RX's
HDMI OUT is well connected with HDMI display.
