Digitus Biometrics dbNEXII, User Manual

Page: 15 / 27

Digitus Biometrics, Inc.
User Manual - Models: dbNEXII, dbNEXIII, dbSAI, dbTRI
Page 15 of 27
Each day allows for up to 2 non-contiguous blocks of time to be entered for each
day. If only a single block of time is required for a given day, leave the 2nd Time
Code set to 00:00-00:00.
Note that times are entered using 24hr clock format.
Note: you can use the # key to step through any section without making changes.
Example 1 - Single Block of time for a given day
If you want to allow access between the hours of 9:00am to 5:00pm, enter data as
follows:
1st Time Code:
SUN: 09:00:-17:00
2nd Time Code:
SUN: 00:00-00:00
Example 2 - Two Blocks of time for a given day
If you have cleaning crews who are allowed access only between the hours of
6:00am to 8:00am and 8:00pm to 10:00pm, enter data as follows:
1st Time Code:
SUN: 06:00:-08:00
2nd Time Code:
SUN: 20:00-22:00
After entering the times for Sunday you will be prompted with the following:
Make MON Same?
Yes=1 No=0
If you want Monday to have the same times as Sunday press 1. If you want to enter
different times for Monday press 0. If you press 0, enter the times for Monday, in
exactly the same format as Sunday. If you choose 1 you will be asked if you want
Tuesday to have the same time as Monday. This process repeats until you have
completed the access times thru Saturday.
Once all time have been entered, you will be prompted:
Save Time Code?
Yes=1 No=0
Press the 1 (one) key to save the time code.