3. Use the numeric keypad to enter the loco address you want to run, in this
case locomotive
67
, on
JUMP 1
and press the
lOCO
key again to select it
on
JUMP 1
. The display will be steady and you will be able to control the
speed and direction of the loco you selected using the DC power pack
attached to
JUMP 1
.
4. When you have
JUMP 1
on the DCS51’s display (
JUMP Indicator Dot
is
steady), you can use the numeric keys to make changes to the function con-
trols on the
JUMP 1
loco (turn on/off lights etc.). The smooth DC power
pack being used as the
JUMP 1
throttle will continue to control speed and
direction of the loco address selected on
JUMP 1
. The DCS51’s
Throttle
Knob
and
Direction Control Lever
will continue to control the speed and
direction of the loco selected on the
Local Throttle
(loco 3856 from the
previous section).
Note:
You must have functions/lights installed and connected to the func-
tion leads of the decoder in order for the function keys to work. Many DCC
ready locomotives have the headlight installed and the headlight can be
turned on and off with the
laMp/0
key. A sound board must be installed
and connected in order to use the Whistle and Bell functions. A special cou-
pler is required in order to use the Coupler function.
©2012 Digitrax, Inc.
www.digitrax.com
46
