© 2020 Digitrax, Inc.
www.digitrax.com
23
23
7.3 Utility tasks for setup:
To enter the Utility Menu, from the home screen
press the key. Main Menu A will display giving
you a list of menu options. Select 3- UtilityTasks by
pressing the
key on the keypad. This will enter
the Utility Menu
7.3.1 Soft Clear
If the DT602 is plugged into LocoNet in Utility
Menu, pressing the
key will start a Soft Clear.
In this mode the Locomotive speeds are set to zero
and the functions are turned off.
7.3.2 Fast clock editor
In the Utility Task screen press the
key to enter
the fast clock edit screen. The prompt line covers
the key inputs. The speed knobs change the hours
and minutes and the numeric keys set the fast clock
rate, up to a maximum of x20. Rate of 00 stops the
fast clock. When the values are what you want, press
the
“Save” key to update the fast clock back to
the system.
7.3.3 DT602 Options Editor
In the Utility Task screen press the
key to enter the throttle Options Editor
screen. This is where you can personalize many settings for this throttle.
1. In Options Editor the left knob scrolls through
the available option line ID numbers and the
right knob changes the current setting. The “UP/
DOWN” soft keys will also change the ID num-
ber of the option.
2. When you have the desired setup press the
key to save the settings and exit.
3. Line ID# 40 is the return to Factory Default set-
ting choice, which are good for most usage.
The available Options are described by the text, and
more details are on the Digitrax web site.
The LCD normal brightness level is set by Option ID15 “Max LCD brite
level”and will begin to dim to level ID16 “Min LCD brite level” after ID18
“LCD brite hold delay “. For ID18=0 the LCD is always ON, with no power
saving. ID19 “LCD pwr save delay“ sets the time at the lower ID16 level
EDITING Fast Clock:TIME
Rate:
00
Do Alarm
Save
00:09
am
DT602 Options Editor:
ID Option Name State
1
Ballistic Knobs
=on
2
Key clicks
=on
3
Duplex RF allow
=on
4
IR allow
=on
5
Fast Clock show
=off
6
24Hr Clock mode
=off
7
Fclock Alarm
=off
8
Enc=>LCD wake
=off
9
FnKey=>LCD wake
=off
10 Expanded Cmds
=off
Up
Down
Change
UTILITY Menu:
0- Last Menu
1- Soft Clear
2- FastClock edit
3- Throttle Option edit
4- Route edit
5- Duplex RF Scan
6- Duplex Edit
EXIT
