Receiver powered by PoE.
Plug and Play - no driver or software installation needed.
Built-in EDID Hotplug Refreshing Function.
EDID priority management of HDMI outputs.
Maximum distance of HDMI, IR, and RS-232 up to 100m.
Bi-Directional RS-232 pass through and IR Control: IR Out (Transmitter)/ IR In
(Receiver)- 3.5mm phone jack.
Supports HDMI resolutions up to Ultra HD 3840 x 2160 (4K x 2K) @ 30Hz and
1080p Full HD.
Full HDCP and HDMI Compliance.
Support Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, LPCM 7.1 audio.
Support 36bit Deep Color (12bit each).
Support 3D, CEC & Lip Sync pass-through.
Locking DC12V 3A Power Jack.
The D2G ET-H4T2100 & ET-H4R2100 HDMI Extender Set supports HDBaseT
technology which transmits HDMI signal and muti-channel audio at resolution
Ultra HD 4K x 2K (3480 x 2160 @ 30Hz) and 1080p Full HD up to 100m via Cat5e
or Cat6 cable.
The Extender Set is embedded with HDMI Splitter function, as well as receiver
powered by PoE. The EDID priority management of HDMI outputs supports EDID
Hotplug refreshing function. This product also provides Bi-Directional RS-232 and
IR to control the connected devices from either source or display location.
All features are made to simplify installation and reduce costs, at the same time
providing exceptional video and audio quality. The HDBaseT 100m HDMI Extender
Set is the perfect solution for Digital Signage, tradeshows, home theater installations,
medical facilities, and other public exhibitions.
Embedded HDMI Splitter function.