DigiTech VOCALIST LIVE 4, Owner'S Manual

Page: 20 / 38

4
Effects and Parameter Descriptions
Preamp
The Preamp row includes a model of a tube-based preamp, a de-esser and audio frequency band
limiting. The preamp is controlled by the Type and Gain parameters. The de-esser is controlled
by the De-Esser parameter, and band limiting is controlled by the Resonance and Band Center
parameters. In order to turn the preamp row off, you need to set Type to
Pre Bypass
, De-
esser to 0, and Band Resonance to 0.
Type
pre BYPASS
PRE TUBE
PRE harsh
1
2
3
Bypasses the preamp model (turns it off).
Selects a tube preamp model, which provides
mild distortion to give your vocals more
warmth.
Selects a preamp with heavy distortion and low
susceptibility to feedback.
Gain
PRE GAIN
Adjusts the preamp’s gain. Range: 0-99
De-esser
DE-ESSER
Increasing this value applies more gain reduction
to sibilant sounds. Range: 0-99
Band
Resonance
BAND RES
Controls the narrowness of the selected audio
frequency band (see Band Center, below). All
frequencies outside the band are attenuated
while all frequencies inside the band have no
attenuation. There is no band limiting applied
when this parameter is set to 0. As this
parameter is turned up, the band becomes
narrower, and the effect of the band limiting
becomes more prominent. Range: 0-99.
Band Center
BNDCEN
xxxx Controls the location of the audio frequency
band center, where XXXX is the band center in
Hz. Range: 80-7650 Hz