at minimum.
If you call for a continuous controller definition, but do not have the FXH#7 pedal attached the mini-
mum value for the controller will be transmitted. This may result in no volume or lowest pitch, or any
other minimum function of the continuous controller's definition.
END-OF-BANK AND END-OF-PROGRAM MARKERS
To mark the last preset in a bank of presets, you may use the END-OF-BANK marker. This marker,
when arrived at during operation of the PDS-3500, will recycle you back to the top of the current bank
from whatever point you insert it. When you have programmed and stored the last preset you want on a
bank, advance to the next PRESET number, place the DATA switch in the PROGRAM CHANGE position
and cycle through all 128 program numbers. When you reach program number 128, advance the program
number one more. The display will read "Eb" for END-OF-BANK. Store the END- OF-BANK as you
would a preset.
The END-OF-BANK marker (Eb) causes the PDS-3500 to recycle to the beginning of the particular
bank in which you're operating. You may place the END-OF- BANK marker at any preset number in the
bank, even though you may have more stored presets after the marker. During operation, when you
reach the END-OF- BANK marker, you will be recycled to the beginning of the bank without accessing
the presets that come after the marker. You may access the next BANK by simply pressing the BANK/
STORE FOOT SWITCH.
The END-OF-PROGRAM marker |EP) causes the PDS-3500 to reset to the first bank when this marker is
encountered. The END-OFPROGRAM marker is placed in the same manner as the END-OF-BANK
marker. The END-OF-PRDGRAM marker is used in place of the END-OF-BANK marker when you have
reached both the end of a bank and the end of your programmed settings. During programming, after
you have put the DATA switch in the PROGRAM CHANGE position and cycled through the 12B program
numbers and reached the "Eb" marker, advance the PROGRAM CHANGE number to the "EP"
marker which is right after the "Eb" marker. When you encounter the END- OF-PROGRAM marker
while advancing through presets, you will be recycled to the beginning of the bank in which you are op-
erating. When you attempt to advance to the next bank, the PDS-3500 will recycle to the first bank, even
though there may be other presets in the next banks that have been programmed.
These two markers allow you to more quickly get to the banks and presets you may want to use ra-
ther than having to cycle through unwanted programmed material.