65
Formatting SD Cards
Although it may not be mandatory, it is recommended any memory card that is
inserted into the JamMan
®
Delay for the first time should be formatted using the
JamMan Delay’s format procedure. To format an SD/SDHC Card in the JamMan
Delay, follow these steps:
Insert an optional SD/SDHC card in the
1.
MeMoRY caRD
slot on the
rear panel.
Press and hold the
2.
LooP StoRe
button for six seconds. The display will show
FO
(Format) and the
LooP StoRe
button will begin flashing.
Press the
3.
LooP StoRe
button again. The
DISPLaY
will read
F
?
(Format ?) and
the
LooP StoRe
button will continue to flash. To abort this procedure, press
the
SetUP
button.
To initiate the card formatting procedure, press and hold the
4.
LooP StoRe
button for two seconds. The
DISPLaY
will show
Bu
indicating the card is
being formatted.
NOTE: When using a new SD/SDHC card, it is recommended that you
format it using the procedure outlined above before using it with the
JamMan Delay.
Unformatted Cards
If a memory card is inserted into the JamMan Delay that does not have a valid format,
the JamMan Delay will not recognize it and the
DISPLaY
will read
nF
. The card must be
formatted before the JamMan Delay can use it. To format the card, follow these steps:
While the
1.
DISPLaY
reads
nF
, the
StoRe
button will begin flashing prompting
for a format confirmation.
Press the flashing
2.
LooP StoRe
button. The
DISPLaY
will read
F
?
and the
LooP StoRe
button will continue to flash. You can press the
SetUP
button
to abort the procedure.
To initiate the card formatting procedure, press and hold the
3.
LooP StoRe
button for two seconds. The
DISPLaY
will show
Bu
indicating the card is
being formatted. Once completed, the
DISPLaY
will read
1
and the card is
now ready for recording.
Using Optional SD/SDHC Memory Cards
Summary of Contents for JAMMAN - REV 18-0687
