60
The JamMan
®
Delay has 99 memory locations and at some time you may need
to delete the contents of a memory location so it may be reused or to free up
memory. To delete a loop from a memory location, follow these steps:
Select the phrase you want to delete using the
1.
LooP SeLect
buttons.
If the
caRD MeM
LED is lit, you have selected a loop on the optional
memory card.
Press and hold the
2.
LooP StoRe
button for 2 seconds until the
DISPLaY
shows
EL
and release. The
LooP StoRe
button will begin flashing
waiting for a delete confirmation.
NOTE: If the
DISPLaY
shows
Ei
or
EC
, you have held the
LooP StoRe
button too long and need to abort this procedure and start over.
Press the
SetUP
button at this point to abort the Delete procedure.
Press the
3.
LooP StoRe
button again. The display reads
E
?
(Erase
Loop?). The
LooP StoRe
button will continue to flash. To abort this
procedure at any time, press the
SetUP
button at any time.
If you want to delete the contents from this memory location and
4.
return it to its default state, press and hold the
LooP StoRe
button
for two seconds. The
DISPLaY
will briefly read
dE
when the delete
procedure is complete and then return to the memory number.
Warning: Deleting a memory location is irreversible and will
erase any recorded information that resides here. Use the Delete
function with caution.
Deleting Individual Loop Phrases
Summary of Contents for JAMMAN - REV 18-0687
