DigiTech JAMMAN - REV 18-0687, Owner'S Manual

Page: 60 / 80

54
Any phrase recorded into the JamMan
®
Delay can be played in two ways:
Either as a continuous Loop, or as a Single “one-shot” sample.
Single phrases are designed to play the recorded phrase only once and stop.
All phrases are recorded as loops by default but they can be changed to a
Single phrase if desired. You can always change Single phrases back to Loops
later without harming the phrase. To change between Single and Loop, follow
these steps:
Select a previously recorded Loop phrase ( 1.
LooP
LED is lit) using the
LooP UP/LooP DoWN
footswitches or
SeLect
buttons. If the
caRD MeM
LED
is lit, you have selected a memory location on the optional memory
card.
Press the 2.
SetUP
button once. The
LooP
or
SINgLe
LED will now be lit,
and th e
DISPLaY
will show
Lo
(loop) or
Si
(single).
Use the 3.
SeLect
buttons to select
LooP
or
SINgLe
.
The 4.
LooP StoRe
button will light to indicate this change must be stored if
it is to be recalled later. Press the
LooP StoRe
button twice to store the
changes, if desired, or press the
SetUP
button four times to exit Setup
mode.
Single phrases cannot have overdubs added to them. Repeated presses of
the
Rec/PLaY/oVeRDUb
footswitch will just restart the Single phrase playback
from the beginning.
Loop / Single Phrases