DigiTech JAMMAN - MANUAL 2, Owner'S Manual

Page: 60 / 68

56
The Erase Loops procedure only erases JamMan Stereo loop data from a
memory card. All other data and files on the card are left untouched.
To erase all loops from an optional SD/SDHC memory card, follow these steps:
Install an optional SD/SDHC memory card in the JamMan Stereo’s 1.
memory card slot on the rear panel.
Select a loop memory location that lights the 2.
caRD MeM
LED.
Enable the 3.
sHIft
button.
Press and hold the 4.
DeLete
button for four seconds until
EC
(Erase
Memory Card Loops) appears in the
DIsPLaY
and release (
EL
will
show briefly first but keep holding the button until
EC
appears). The
DeLete
button will begin flashing.
Press the 5.
DeLete
button again. The
DIsPLaY
reads
E ?
(Erase Loops?).
The
DeLete
button will continue to flash. To abort this procedure,
press the
eXIt
button.
To erase all loop data, press and hold the 6.
DeLete
button for two
more seconds. The
DIsPLaY
will show
Bu
indicating the card is being
erased.
Erase All Loops - Memory Card
Locked
Unlocked
SD
Card
NOTE: If when you try to delete a loop from
SD card the display flashes
CP
, the SD copy
protection switch is in the “Locked” position.