DigiTech HARMONYMAN -, Owner'S Manual

Page: 11 / 36

5
Guided Tour - Rear Panel
1 2 3 4 5 6
Guitar Clean Input
Connect your clean guitar signal here for chord recognition. This is the
same signal that will be shifted to generate harmonies if there is nothing
connected to the Distortion Return jack.
Distortion Send / Return
Many guitarists prefer to add distortion before adding harmony signals. To
do this, connect the Dist Send jack to the input of your distortion pedal,
and connect the output of the distortion back to the Dist Return. Now
the musIQ
TM
feature’s chord recognition will still be based on your clean
guitar signal, but the pitch shifting will be applied as a post-distortion
effect.
Sidechain Input / Thru
Optionally connect a second clean guitar so another guitarist can play
chords while you solo over them – any of the triad-centered harmony
voicings will respond dynamically to the chord changes. The analog
Sidechain Thru provides a clean signal that can then be processed and sent
to the rhythm guitar amp.
1.
2.
3.