DigiTech HARMONYMAN -, Owner'S Manual

Page: 16 / 36

10
Using the HarmonyMan
TM
Play Your Solo
Once you have the key and scale recognized, you can then enable the
harmonies and play your solo.
Press the
Harmony On/Off
footswitch so that the
On
LED is lit.
Play a solo in the key and scale that is indicated by the Harmony Key
Display
.
Turn the Mix knob counter-clockwise to hear more lead guitar and less
harmony, or turn the knob clockwise to hear more harmony and less lead
guitar.
Note:
Any time you change the voicing or mix from what’s stored in the
current memory, the Store button’s LED illuminates. Changes will be lost
when you switch to a new memory or turn off the HarmonyMan unless you
store the changes to the current memory location.
Store Settings to a Memory Location
Press and release the Memory Select footswitch repeatedly until Memory 1
is selected.
Choose your harmony voicings for Voice 1 and Voice 2, and set the
Mix knob to the desired level. If you want to store a key and scale that
is different from the key and scale that is currently displayed, set the
harmony key manually (see page 8). The
Store button’s LED illuminates
when any of these settings are changed.
Press and release the
Store
button. The current settings have now been
stored to Memory 1. You can now recall these settings at any time by
pressing the
Memory Select footswitch until Memory 1 is selected.
Note : If the musIQ
TM
button is illuminated when the Store button is
pressed, the automatic harmony key that is displayed is saved and used
as the manual harmony key. Also, when stepping through the different
memory locations, the position of the Mix knob does not necessarily
reflect the actual mix level since the mix is stored independently into each
memory.
1.
2.
3.
1.
2.
3.